THÔNG SỐ KỸ THUẬT:

Software:

-  Cisco Unified Wireless Network Software Release 8.10.MR3 or later

-  Cisco IOS ® XE Software Release 17.3.1, or later

Supported wireless LAN controllers:

-  Cisco Catalyst 9800 Series Wireless Controllers

-  Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11ac:

-  2×2 downlink MU-MIMO with two spatial streams

-  PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)

-  WPA3 support

802.11ax:

-  2×2 uplink/downlink MU-MIMO with two spatial streams

-  Uplink/downlink OFDMA

-  PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)

-  WPA3 support

Integrated antenna:

-  2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth

-  5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces:

-  1x 10/100/1000 Base-T (Ethernet) Uplink Interface

-  Management console port (RJ-45)

Indicators:

-  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H):

-  Access point (without mounting brackets): 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)

Weight:

-  0.7 lb. (329.5g)

Input power requirements:

-  802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)

-  Cisco power injector, AIR-PWRINJ6=

-  802.3af PoE

-  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)