THÔNG SỐ KỸ THUẬT:

Software:

-  Cisco Unified Wireless Network Software Release 8.9 or later

-  Cisco IOS ® XE Software Release 16.11 or later

Supported wireless LAN controllers:

-  Cisco Catalyst 9800 Series Wireless Controllers

-  Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

802.11ac:

-  4×4 downlink MU-MIMO with four spatial streams

-  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

802.11ax:

-  4×4 downlink MU-MIMO with four spatial streams

-  Uplink/downlink OFDMA

-  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

Integrated antenna:

-  2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth

-  5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately):

-  Cisco Catalyst 9115E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

-  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

Interfaces:

-  1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

-  Management console port (RJ-45)

-  USB 2.0

Indicators:

-  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H):

-  Access point (without mounting brackets):  8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)

Weight:

-  2.43 lb (1.1 kg)

Input power requirements:

-  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)

-  Cisco power injector, AIR-PWRINJ6=

-  802.3af PoE

-  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Note:

-  When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off.

System memory:

-  2048 MB DRAM

-  1024 MB flash