THÔNG SỐ KỸ THUẬT:

Software:

-  Cisco Unified Wireless Network Software Release 8.9.x or later

-  Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later

Supported wireless LAN controllers:

-  Cisco Catalyst 9800 Series Wireless Controllers

-  Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

802.11ac:

-  4×4 downlink MU-MIMO with four spatial streams

-  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

802.11ax:

-  4×4 downlink MU-MIMO with four spatial streams

-  Uplink/downlink OFDMA

-  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

Integrated antenna:

Flexible radio (either on 2.4 GHz or on 5 GHz)

-  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth

-  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Dedicated 5-GHz radio

-  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately):

-  Cisco Catalyst 9120AXP Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513P4M-N= antenna

-  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

-  Supports Self-Identifiable Antennas (SIA) on one RP-TNC port

Smart antenna connector:

-  Compact multi-RF connector with DART interface

-  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector

-  Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio

Interfaces:

-  1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

-  Auto-MDIX support

-  Management console port (RJ-45)

-  USB 2.0 @ 4.5W

Indicators:

-  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H):

-  Access point (without mounting brackets): 8.5 x 8.05 x 2.0” (21.6 x 21.6 x 5.1 cm)

Weight:

-  3 lb (1.36 kg)

Input power requirements:

-  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)

-  802.3af PoE

-  Cisco power injector, AIR-PWRINJ6= (Note: This injector supports only 802.3at)

-  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

System memory:

-  2048 MB DRAM

-  1024 MB flash