THÔNG SỐ KỸ THUẬT:

Software:

-  Cisco IOS ® XE Software Release 17.6.2 or later

Catalyst C9124AXI/C9124AXD Embedded wireless Controller

-  Cisco IOS ® XE Software Release 17.6.2 or later

Supported wireless LAN controllers:

-  Cisco Catalyst 9800 Series Wireless Controllers

802.11ac:

-  4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO

-  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

-  WPA3 support

802.11ax:

-  4×4:4 in 2.4GHz + two 2×2:2 radios in 5 GHz uplink/downlink MU-MIMO Uplink/downlink OFDMA

-  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

-  WPA3 support

-  WPA3-Enterprise 192 support

External antenna:

-  The Catalyst 9124AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5GHz)

-  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios.

-  Supports Self-Identifiable Antennas (SIA)

-  For more details, see Catalyst 9124AX Series Getting Started Guide.

Interfaces:

-  1x 100/1000/2500 BASE-T (Ethernet) uplink interface

-  1x Gigabit Ethernet SFP

-  Supports PoE output (802.3af compliant PSE) on the 1x 10/100/1000 BASE-T (Ethernet) downlink interface if C9124AX powered from one of the following:

UPOE or 802.3bt inline power source (Switch or Power Injector)

DC input (with external power supply rated ³ 60W)

-  Management console port (RJ-45)

Indicators:

-  Status LED indicates boot loader status, association status, operating status, boot loader warnings

Dimensions (W x L x H):

-  Access point (without mounting brackets): 10.2 x 9.2 x 3.2 in. (25.9 x 23.3 x 8.1 cm)

Weight:

-  7 lb. (3.1 kg)

Input power requirements:

-  802.3af Power over Ethernet (PoE), 802.3at PoE+, 802.3bt PoE++, Cisco Universal PoE (Cisco UPOE ®)

-  Cisco power injector, AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2=

-  Cisco power injector, AIR-PWRINJ6= (Note: This injector supports 802.3at)

-  DC power source: Auxiliary DC input, 24V to 56V